ekey home finger scanner integra 2.0

Due to its slim and compact design, the integra 2.0 finger scanner is the ideal solution for integration into front doors, entrance panels and mailboxes. The stylish and sleek device is available in stainless steel, white or gold color. Via mounting clamps on the external side of the housing, the finger scanner can be fitted into cavity walls, and to simplify installation into solid walls, a dedicated mounting kit is available.

The finger scanner is equipped with a line sensor, so instead of placing a finger on the surface, the finger has to be swiped over the sensor. This way, no fingerprints are left, which could else be used for misuse. In addition, the finger scanner is equipped with intelligent software: On each operation, the system continues learning. Changes in the user’s habit will be recorded automatically.

There is a RJ-plug on the reverse side of the finger scanner, through which the device is connected to the ekey home control panel. Using the pre-configured cables, it is virtually impossible to wire the system incorrectly. The communication between both components is encrypted.

ekey home control panel

For the operation of an ekey home system, a suitable ekey home control panel is required. Depending on the type of installation, it is available in different versions.

	With its compact dimensions, the DRM control panel is ideally suited for the installation on a DIN rail into an electrical cabinet (distribution board) or onto a wall. Two different versions are available: While the ekey home 1 CP DRM is equipped with 1 dry relay output and 1 digital input, the ekey home 2 CP DRM is equipped with 2 dry relay outputs and 2 digital inputs. To wire the control panel with the finger scanner, it contains screw terminals.
	The wall-mounted control panel can be fitted on a DIN rail onto a wall, or into the electrical cabinet (distribution board). Two different versions are available: While the ekey home CP WM is equipped with 1 dry relay output, the ekey home 3 CP WM is equipped with 3 dry relay outputs. To wire the control panel with the finger scanner, it contains spring clips.
	The integra control panel is designed for installation during the production of doors. It is either fitted directly into the door leaf or into the door frame. Two different versions are available: While the ekey home 1 CP IN is equipped with 1 dry relay output, the ekey home 2 CP IN is equipped with 2 dry relay outputs. Wiring the control panel to the finger scanner is realized via dedicated plugs. It is virtually impossible to wire the system incorrectly.

The relay outputs are used to control electromechanical locks, door strikes, engines for garage doors, intrusion alarms, etc.

Examples:

ekey home 1 CP WM: The lock is connected to the relay output. Swiping the right index finger will open the front door.
ekey home 2 CP DRM: Both lock and intrusion alarm system are controlled by two different relay outputs. While you unlock your front door when swiping the first finger (relay 1), the alarm system will be armed/disarmed when swiping the second one (relay 2).