ekey home finger scanner outlet-mounted

With its compact dimensions of 50x50 mm, the outlet-mounted finger scanner is the ideal solution for installation into electrical gang boxes, entrance panels and mailboxes. Compatible with the frames of leading switch manufacturers and available in white, anthracite and aluminum color, it fits perfectly into their existing product range.

The finger scanner is equipped with a line sensor, so instead of placing a finger on the surface, the finger has to be swiped over the sensor. This way, no fingerprints are left, which could else be used for misuse. In addition, the finger scanner is equipped with intelligent software: On each operation, the system continues learning. Changes in the user’s habit will be recorded automatically.

There are screw terminals on the reverse side of the finger scanner, through which the device is connected to the ekey home control panel. The communication between both components is encrypted.

ekey home control panel

For the operation of an ekey home system, a suitable ekey home control panel is required. Depending on the type of installation, it is available in different versions.

files/Produkte/REG.jpg

With its compact dimensions, the DRM control panel is ideally suited for the installation on a DIN rail into an electrical cabinet (distribution board) or onto a wall. Two different versions are available: While the ekey home 1 CP DRM is equipped with 1 dry relay output and 1 digital input, the ekey home 2 CP DRM is equipped with 2 dry relay outputs and 2 digital inputs. To wire the control panel with the finger scanner, it contains screw terminals.

files/Produkte/steuereinheit_ap.jpg

The wall-mounted control panel can be fitted on a DIN rail onto a wall, or into the electrical cabinet (distribution board). Two different versions are available: While the ekey home CP WM is equipped with 1 dry relay output, the ekey home 3 CP WM is equipped with 3 dry relay outputs. To wire the control panel with the finger scanner, it contains spring clips.

The relay outputs are used to control electromechanical locks, door strikes, engines for garage doors, intrusion alarms, etc.

Examples:

ekey home 1 CP WM: The lock is connected to the relay output. Swiping the right index finger will open the front door.
ekey home 2 CP DRM: Both lock and intrusion alarm system are controlled by two different relay outputs. While you unlock your front door when swiping the first finger (relay 1), the alarm system will be armed/disarmed when swiping the second one (relay 2).