ekey uno wall power supply for rechargeable battery
You can use the wall power supply to charge the rechargeable battery of the ekey uno rechargeable fingerprint scanner, wireless, quickly and efficiently. With average use, this is charged every 6 months. The full battery charging time is approx. 5 hours.
- Color: white
- Cable: 1.5 m with plug
- Output voltage: 12 VDC
- Output current: 1000 mA
Wall power supply with 1.5 m cable for the rechargeable battery of the wireless fingerprint scanner
Battery status of the ekey uno rechargeable battery
The ekey uno rechargeable fingerprint scanner, wireless, gives you a signal when the level of the rechargeable battery reaches 20%. The top-left and bottom-right segments of the fingerprint scanner’s signaling segments light up red.
Charging the ekey uno rechargeable battery
To charge the ekey uno rechargeable battery, please wait until it has reached room temperature again. During the charging process, the rechargeable battery LED flashes red and green. As soon as the rechargeable battery is fully charged, it will glow continuously green. You can easily charge the rechargeable battery overnight and thus quickly restore the wireless battery operation of the fingerprint scanner. It takes about 5 hours to fully charge the rechargeable battery.
Battery life
The rechargeable battery is designed for approx. 350 charging cycles.
Safety information
Only charge the rechargeable battery with the appropriate wall power supply. Attach the bottom cap to the ekey uno while charging the rechargeable battery. This will keep the ekey uno protected against the ingress of water.
IP Code | IP00 |
---|---|
EAN code | 9120068255097 |
Surface | Roh |
Production component | NETZTEILE |
Power type | AC |
Maximum supply voltage | 253 V |
Minimum supply voltage | 207 V |
Maximum operating temperature | 40 °C |
Minimum operating temperature | 0 °C |
Width | 25 mm |
Length/Height | 70 mm |