ekey uno wall power supply for rechargeable battery
Delivery time 5 workdays
You can use the wall power supply to charge the rechargeable battery of the ekey uno rechargeable fingerprint scanner, wireless, quickly and efficiently. With average use, this is charged every 6 months. The full battery charging time is approx. 5 hours.
- Color: white
- Cable: 1.5 m with plug
- Output voltage: 12 VDC
- Output current: 1000 mA
Wall power supply with 1.5 m cable for the rechargeable battery of the wireless fingerprint scanner
Battery status of the ekey uno rechargeable battery
The ekey uno rechargeable fingerprint scanner, wireless, gives you a signal when the level of the rechargeable battery reaches 20%. The top-left and bottom-right segments of the fingerprint scanner’s signaling segments light up red.
Charging the ekey uno rechargeable battery
To charge the ekey uno rechargeable battery, please wait until it has reached room temperature again. During the charging process, the rechargeable battery LED flashes red and green. As soon as the rechargeable battery is fully charged, it will glow continuously green. You can easily charge the rechargeable battery overnight and thus quickly restore the wireless battery operation of the fingerprint scanner. It takes about 5 hours to fully charge the rechargeable battery.
Battery life
The rechargeable battery is designed for approx. 350 charging cycles.
Safety information
Only charge the rechargeable battery with the appropriate wall power supply. Attach the bottom cap to the ekey uno while charging the rechargeable battery. This will keep the ekey uno protected against the ingress of water.
| IP Code | IP00 |
|---|---|
| EAN code | 9120068255097 |
| Surface | Roh |
| Production component | NETZTEILE |
| Power type | AC |
| Maximum supply voltage | 253 V |
| Minimum supply voltage | 207 V |
| Maximum operating temperature | 40 °C |
| Minimum operating temperature | 0 °C |
| Width | 25 mm |
| Length/Height | 70 mm |
Local Mode
Without Internet/WLAN
✓ Open the door with a fingerprint scanner or a smartphone near the door
✓ Intuitive administration via smartphone (e.g. users, devices)
✓ Different functions with different fingers (device-specific)
✓ Up to 20 users (up to 4 fingers per user)
✓ Firmware updates
Plus Mode
With smart functions
✓All basic functions from the Local mode
✓ It is still possible to open the door with a fingerprint scanner as before without Internet/WLAN
✓ Remote opening via smartphone
✓ Push notifications when the door is opened
✓ Time slots (e.g. person X: Access Wednesday, 9 a.m. to 1 p.m.)
✓ Administer up to 20 fingerprint scanners centrally in the app
✓ Store fingers once and synchronize to other devices
✓ Remote administration of authorizations
✓ Access log over 30 days (activate/deactivate and delete)
✓ Amazon Alexa connection
✓ Smart home connectivity (HTTP(S) requests, APPMODULE, REST API)
✓ Data backup of the device configuration
✓ Remote support
Extensions in Plus mode
(subject to a charge)
+ Extendable up to 100 users
